9 min read
Introduction
A Telecel router (also known as a 4G/5G Wi-Fi router or MiFi) is one of the most convenient ways to get internet access for multiple devices—laptops, tablets, smart TVs, and phones—whether you’re at home, in the office, or on the go. If you have a Telecel SIM card inserted in your router but the internet isn’t working or is painfully slow, the problem is almost always incorrect APN (Access Point Name) settings .
This ASJ guide provides everything you need to configure your Telecel router correctly, troubleshoot common issues, and optimize your connection for the best possible speeds. These instructions work for all router brands including Huawei, ZTE, TP-Link, Mafee, and other 4G/5G CPE (Customer Premises Equipment) devices .
Key Takeaways
- If you have a Telecel SIM card inserted in your router but the internet isn't working or is painfully slow, the problem is almost always incorrect APN (Access Point Name) settings .
- This ASJ guide provides everything you need to configure your Telecel router correctly, troubleshoot common issues, and optimize your connection for the best possible speeds.
- Access the router's admin panel via 192.168.0.1 or similar, create a new APN profile with these settings, save, and restart.
Quick Answer: Telecel Router APN Settings
If you’re in a hurry, here are the correct APN settings for any Telecel router:
| Field | Value |
|---|---|
| APN | internet |
| Username | (Leave blank) |
| Password | (Leave blank) |
| Authentication | None or PAP |
| APN Type | default,supl |
These are the official Telecel Ghana settings that work across all devices .
Step-by-Step Router Configuration
The exact steps may vary slightly depending on your router brand, but the general process is the same for all 4G/5G routers and MiFi devices.
Step 1: Connect to Your Router
-
Turn on your Telecel router and wait for it to boot up (indicators should stabilize)
-
On your laptop or phone, connect to the router’s Wi-Fi network
-
The network name (SSID) and password are usually printed on a sticker on the back or bottom of the device
Step 2: Access the Admin Panel
Open a web browser and enter the router’s IP address. Common addresses are:
-
192.168.0.1 -
192.168.1.1 -
192.168.8.1
Check the sticker on your device if unsure. Some routers also use 192.168.100.1 or 192.168.0.1.
Step 3: Log In
Enter the admin username and password:
-
Most devices use
adminfor both username and password -
Some newer models may have a unique password printed on the device sticker
-
If you’ve changed the password and forgotten it, you’ll need to reset the device to factory settings
Step 4: Navigate to APN Settings
Look for menus labeled:
-
Mobile Network or Internet Settings
-
APN or Access Point Name
-
Profile Management
-
Dial-up Settings
On Huawei routers, this is often found under Settings → Mobile Network → APN. On ZTE routers, look for Network Settings → APN Management.
Step 5: Create or Edit APN Profile
Enter these values exactly:
| Field | Value |
|---|---|
| Name / Profile Name | Telecel Internet |
| APN | internet |
| Username | (Leave blank) |
| Password | (Leave blank) |
| Authentication | None or PAP |
| APN Type | default,supl |
Some routers may also require:
-
PDP Type: IPv4 or IPv4/IPv6
-
PDP Address: Leave blank
-
DNS: Leave as automatic
Step 6: Save and Restart
-
Click Save or Apply
-
Restart your router (power off, wait 30 seconds, power on)
-
Wait 2–3 minutes for it to reconnect to the network
Router-Specific Setup Notes
Huawei 4G/5G Routers (B535, B818, B311, etc.)
-
Connect to the router’s Wi-Fi or via Ethernet
-
Open browser to
192.168.8.1 -
Login with
admin(check sticker for password) -
Go to Settings → Mobile Network → APN
-
Select Add New APN or edit the default profile
-
Enter APN:
internet, leave username/password blank -
Save and restart
ZTE Routers (MF283, MF286, etc.)
-
Connect to router and open
192.168.0.1or192.168.1.1 -
Login (default username:
admin, password:admin) -
Navigate to Network Settings → APN Management
-
Create a new profile with APN:
internet -
Set as default profile and restart
TP-Link MiFi (M7200, M7350, etc.)
-
Connect to the MiFi Wi-Fi
-
Open
192.168.0.1in browser -
Login (default password:
admin) -
Go to Settings → Dial-up
-
Under APN, select Manual and enter
internet -
Save and restart the device
Troubleshooting Telecel Router Issues
No Internet Despite Correct APN Settings
If you’ve entered the correct APN but still have no internet:
-
Check your data balance – Insert the Telecel SIM into a phone and dial
*124#to check balance, or log into your Telecel account -
Ensure Mobile Data is enabled – Some routers have a separate toggle for mobile data; check the admin panel
-
Check if the router recognizes the SIM – Under device status, verify that the SIM is detected and has signal
-
Restart the router – A full power cycle (unplug for 30 seconds) often resolves temporary issues
-
Test the SIM in a phone – If it works in a phone but not in the router, the issue is router-specific
Slow Internet on Telecel Router
Slow speeds are a common complaint among Telecel users. According to customer reports, network performance can vary significantly by location .
What to try:
| Solution | How To |
|---|---|
| Reposition the router | Place near a window or on a higher floor. Signal often improves with elevation and fewer obstacles |
| Check signal strength | In router admin panel, check the signal strength (RSSI). Lower numbers (closer to -50 dBm) are better |
| Switch network mode | In admin panel, try forcing 3G instead of 4G if 4G signal is weak. Sometimes 3G provides more stable speeds |
| Use during off-peak hours | Evening congestion (6–10 PM) can slow speeds significantly |
| Update router firmware | Check for firmware updates in the admin panel |
Router Keeps Disconnecting
If your router frequently drops connection:
-
Check if the device is overheating—place it in a well-ventilated area
-
Ensure the SIM card is properly seated (remove and reinsert)
-
Try a different location with better signal coverage
-
Check for firmware updates
-
If the problem persists, the SIM may be damaged—request a replacement from Telecel
APN Settings Not Saving
If your APN settings revert or don’t save:
-
Factory reset the router (usually a small reset button; press and hold for 10–15 seconds)
-
Re-enter settings after reset
-
Update router firmware if available
Real-World Network Experience
Telecel has been investing heavily in network upgrades. The company added 300 new 4G sites in 2024 and is targeting 2,500 4G sites within three years . In March 2026, engineers from China arrived to support a major network transformation.
However, customer experiences vary significantly by location. Users in areas like Oyibi (Greater Accra) have reported that while Telecel works well by the roadside, signal often “collapses” inside buildings . This suggests that while Telecel’s backbone network is improving, last-mile connectivity can still be problematic in certain areas.
What to Do If Your Area Has Poor Coverage
-
Report the issue – Call Telecel customer care at
100and describe your location -
Request a site visit – Ask if they can check signal strength in your area
-
Consider an external antenna – Some routers support external antennas for better reception
-
Reposition the router – Even moving it a few meters can make a difference
How to Check Your Telecel Data Balance
If your router doesn’t have a built-in USSD feature (most don’t), use one of these methods:
| Method | Instructions |
|---|---|
| Use a phone | Remove SIM from router, insert into phone, dial *124# |
| Telecel App | Download the Telecel Play app (if your SIM is registered) |
| Customer Care | Call 100 to inquire about your balance |
After checking, reinsert the SIM and restart the router.
Activating Telecel Data Bundles
If your data bundle has expired, you need to purchase a new one:
-
Dial
*900#from a phone with the Telecel SIM -
Select your preferred bundle (daily, weekly, monthly, or no-expiry)
-
Confirm purchase
-
Reinsert SIM into router and restart
Popular bundle options:
| Bundle Type | Price (GHS) | Data | Validity |
|---|---|---|---|
| No-Expiry | 5 | 550 MB | No Expiry |
| No-Expiry | 20 | 1.65 GB | No Expiry |
| No-Expiry | 50 | 4.4 GB | No Expiry |
| Daily | 3 | 440 MB | 1 Day |
| Daily | 5 | 770 MB | 3 Days |
| Monthly | 20 | 2.42 GB | 30 Days |
| Monthly | 50 | 6.05 GB | 30 Days |
Router Security Best Practices
Once your router is working, consider these security tips:
Change Default Admin Password
-
The default
admin/adminlogin is well-known and insecure -
Change it to a strong password in the admin panel
Set a Strong Wi-Fi Password
-
Use a mix of letters, numbers, and symbols
-
Change from the default password printed on the device sticker
Keep Firmware Updated
-
Check periodically for firmware updates
-
Updated firmware fixes bugs and security vulnerabilities
Quick Reference Card
| Setting | Value |
|---|---|
| APN | internet |
| Username | (blank) |
| Password | (blank) |
| Default Admin IP | 192.168.0.1 or 192.168.1.1 or 192.168.8.1 |
| Default Login | admin / admin |
| Data Balance USSD | *124# (use phone) |
| Data Bundles USSD | *900# (use phone) |
| Customer Care | 100 |
Frequently Asked Questions (FAQs)
1. What is the correct APN for Telecel router?
The APN is internet. Leave username and password blank .
2. Why is my Telecel router internet so slow?
Slow speeds can result from weak 4G signal, network congestion, or location issues. Try moving the router to a window, switching to 3G mode, or using during off-peak hours .
3. How do I reset my router to factory settings?
Look for a small reset button (often inside a pinhole). Press and hold for 10–15 seconds while the device is powered on.
4. Can I use a Telecel SIM in any 4G router?
Yes, as long as the router is unlocked. Some routers are locked to specific networks—if your Telecel SIM doesn’t work in a router that works with other networks, the router may be locked.
5. How do I check my Telecel data balance on router?
Most routers don’t support USSD codes. Remove the SIM, insert into a phone, and dial *124# to check balance .
6. Does Telecel offer 5G routers?
5G services are not yet commercially available on Telecel. The company is ready but awaiting spectrum allocation from regulators. 4G and 4G+ are currently available .
7. Why does my Telecel router work outside but not inside?
Building materials (concrete, metal roofs) can block cellular signals. Try placing the router near a window or on a higher floor.
8. How do I contact Telecel customer care?
Dial 100 from any Telecel line (toll-free) or email [email protected] .
ASJ’s Conclusion
Configuring your Telecel router is straightforward once you have the correct APN: internet with blank username and password. Access the router’s admin panel via 192.168.0.1 or similar, create a new APN profile with these settings, save, and restart.
If you’re experiencing persistent issues, especially with speed or coverage, your location may be the limiting factor—as users in some areas have reported significant challenges despite proper configuration .
Telecel is actively investing in network improvements with 300 new 4G sites already added and engineers supporting upgrades in 2026 . While these upgrades will improve service over time, current experience varies by location. If your router consistently underperforms, testing the SIM in another network may help you determine whether the issue is your device or Telecel’s coverage in your area.
Source: Accra Street Journal
Last Updated on March 21, 2026 by Samuel Kwame Boadu
Disclaimer: Some content on Accra Street Journal may be aggregated, summarized, or edited from third-party sources for informational purposes. Images and media are used under fair use or royalty-free licenses. Accra Street Journal is a subsidiary of SamBoad Publishing Hub under SamBoad Business Group Ltd, registered in Ghana since 2014.
For concerns or inquiries, please visit our Privacy Policy or Contact Page.
Samuel Kwame Boadu is a Ghanaian media entrepreneur and storyteller with a passion for amplifying urban voices and uncovering everyday truths. He is the Editor-in-Chief and Founder of Accra Street Journal, a dynamic digital platform dedicated to capturing the pulse of Ghana’s capital—its people, culture, challenges, business, sports and innovations.
Use the following reference when citing or referencing this article.
Your feedback helps us improve our journalism.
Report an Error
Help us maintain accuracy. Let our editorial team know if you spot an issue in this article.





